Menu
Cart

A4 Sheet Labels

More A4 Sheet Labels ›
105mm x 148.5mm A4 Laser Sheet Label

105mm x 148.5mm A4 Laser Sheet Label
105mm x 35mm A4 Laser Sheet Label

105mm x 35mm A4 Laser Sheet Label
105mm x 37mm A4 Laser Sheet Label

105mm x 37mm A4 Laser Sheet Label
105mm x 42.5mm A4 Laser Sheet Label

105mm x 42.5mm A4 Laser Sheet Label
105mm x 49.5mm A4 Laser Sheet Label

105mm x 49.5mm A4 Laser Sheet Label

Accessories

More Accessories ›

Adhesive Tape

More Adhesive Tape ›
The Teneo range of vinyl and polypropylene tape is available in a choice of nine colours and six widths. They are suitable for use in many applications from carton and bag sealing to product fault marking.

Adhesive Tape
The Teneo range of vinyl and polypropylene tape is available in a choice of nine colours and six widths. They are suitable for use in many applications from carton and bag sealing to product fault marking.

Paper White Tape

Advantage Thermal Ribbons

More Advantage Thermal Ribbons ›
101mm x 610m Inside Wound Thermal transfer ribbons

101mm x 610m Inside Wound
102mm x 600m Outside Wound Thermal Transfer Ribbon

102mm x 600m Outside Wound
104mm x 155m Outside Wound Thermal Transfer Ribbon

104mm x 155m Outside Wound
104mm x 300m Outside Wound Thermal Transfer Ribbon

104mm x 300m Outside Wound
104mm x 360m Inside Wound Thermal Transfer Ribbon

104mm x 360m Inside Wound

Automatic/Semi Automatic Floor Mounted Impulse Sealer

More Automatic/Semi Automatic Floor Mounted Impulse Sealer ›
These FDC models were developed to make a strong (2.2mm) seal and cut off excess material with an additional round element in one easy operation. They are mechanically foot operated.

FDV Range

Automatic/Semi Automatic Table Top Impulse Sealers

More Automatic/Semi Automatic Table Top Impulse Sealers ›
The AI sealer is designed for sealing of thermoplastic films such as polyethylene and polypropylene. These models eliminate operator error in the sealing operation, as it is controlled by a plug-in transistorised circuit board, electronic timers and the uniform pressure provided by an electromagnet.

AI Range
These FDA models are designed for continuous sealing of thicker thermoplastic film and incorporate twin elements for heavy duty applications. There is also a side switch to select single-side sealing, so both thick and thin films can be sealed on one machine.

FDA Range

Bag neck sealers

More Bag neck sealers ›
The model #3235 Tamper Evident Manual Bag Neck Sealer applies in a single pass a closure of 9mm wide adhesive tape to the bag neck, and a tamper evident paper liner to the two adhesive flags.

3235 Tamper Evident Easy Open Bag Neck Sealer
The GF range of standard bag neck sealers offers a choice to suit a particular application. The GF-605K has a steel body for strength, a built in cutter to trim the excess length from the bag neck. It will use adhesive tape up to 12mm wide.

GF-605K Bag Neck Sealer
Model GF-606SK is similar to the GF-605K in features but has the added advantage of being constructed from stainless steel, making it ideal for use in food environments.

GF-606SK Bag Neck Sealer
The heavy-duty end is taken care of by the GF-808K. Again this sealer is made from steel, with a cutter to trim of excess, but it has the added feature of being able to use tape up to 19mm wide. It also has a wide neck to accommodate bigger or thicker poly bags.

GF-808K Bag Neck Sealer
The GF-E9 is a heavy duty bag neck sealer with a 16mm extra wide throat, making it ideal for use with heavy gauge poly bags. Suitable for use with 9 - 12mm sealing tape.

GF-E9 Extra Wide Bag Neck Sealer

Barcode Scanners & Verifiers

More Barcode Scanners & Verifiers ›
The GoDEX GS220 is an affordable hand-held laser barcode scanner suitable for all general purpose barcode scanning applications.

GoDEX GS220 1D Scanner
The GoDEX GS550 2D Barcode scanner can read most popular 2D and 1D barcodes. From barcodes on regular paper to electronic screen, the GoDEX GS550 meets a wide range of barcode scanning applications. 2D barcodes are commonly used on commercial products such as electronic ticketing and e-coupons; aviation, transportation, and logistics now all have embraced the convenience of 2D barcodes. With GS550, users will get a reliable, high performance laser scanner that is suitable for different purposes.

GoDEX GS550 2D Scanner
This 1D barcode laser scanner with pistol grip enables reliable scanning. The OPR-3201 weighs only 80 grams, which is extremely light for a gun type scanner. This solid scanner withstands drops up to 1.5 meter onto concrete.

Opticon OPR-3201 1D Scanner
The RJS Inspector D4000 is the industry's most flexible and cost effective traditional barcode verifier. This unit comes with your choice of tradition laser scanner, for the point-and -shoot simplicity or an optional patented Auto-Optic scan head with four aperture sizes and two light wavelengths (eight different optical configurations). Printed reports can also be generated, using the optional direct thermal printing unit.

RJS Inspector D4000 Auto Optic Barcode Verifier

Cleaning Materials

More Cleaning Materials ›
WET/DRY Non-woven lint-free cleaning cloths Pack of 25

Absorbent cleaning cloths
Anti static Foam cleaner for plastic & synthetic surfaces, 87ml

Anti static Foam cleaner for plastic & synthetic surfaces, 87ml
250ml IPA, 100ml Platen cleaner, 25 wet/dry cloths per pack. Pack of 1

Handy Cleaning Kits - Metal Casing
Removes labels and dissolves adhesive, 200ml can.

Label remover
PUMP SPRAY Cleans and restores grip, maintains print clarity.

Platen roll cleaner & restorer, 100ml

Coding & Marking Solutions

More Coding & Marking Solutions ›
The Linx 10 continuous inkjet printer (CIJ) is designed to meet the specific coding and marking needs of small to medium-sized producers: simple to use, self-servicing and easily moved from one line to another. It’s an inkjet printer capable of coding different products on the same line without taking up valuable production space.

Linx 10 Continuous Inkjet Printer

Colour Printers

More Colour Printers ›
With the ColorWorks C3500 (TM-C3500), you can easily customise and print your own colour labels. Whether it's printing packaging labels with colourful logos and pictures or tickets and ID cards with important barcodes and product information, this printer ensures you can print it all from one machine. It also helps you conform with GHS international chemical labelling guidelines, as labels can be printed on-demand without using pre-printed templates.

Epson ColorWorks C3500
The C7500 can help manufacturers produce consistent, high-quality labels in-house and on-demand. The printer features the new PrecisionCore printhead to ensure reliable, high-quality results. Our unique Nozzle Verification Technology (NVT) and dot substitution help prevent misprints and dead pixels for consistent printouts.

Epson ColorWorks C7500 (Ex-Demo)

Save £2,255.00
The C7500 can help manufacturers produce consistent, high-quality labels in-house and on-demand. The printer features the new PrecisionCore printhead to ensure reliable, high-quality results. Our unique Nozzle Verification Technology (NVT) and dot substitution help prevent misprints and dead pixels for consistent printouts.

Epson ColorWorks C7500 / C7500G
The rugged ColourWorks C831 inkjet printer with tractor feed for printing on continuous paper combines the best of dot matrix and inkjet technology. It combines all the benefits of a rugged colour inkjet printer with the accuracy of an 8-pin tractor feeder and is the first inkjet solution that has been BS5609 certified (complies with the latest GHS standards for chemical labelling).

Epson ColorWorks C831

Continuous Band Sealers - Horizontal

More Continuous Band Sealers - Horizontal ›
The ME-800BS range of continuous band sealers are inexpensive, yet built to a very high quality standard with a stainless steel outer casing, which makes it ideal for use in food preparation and hygienic environments. The sealing speed can be varied to suit the application, and the conveyor will handle weights up to 10kg, closing with a 15mm seal.

Horizontal Band Sealer & 300mm Conveyor - ME-881BS-300L
The ME-800BS range of continuous band sealers are inexpensive, yet built to a very high quality standard with a stainless steel outer casing, which makes it ideal for use in food preparation and hygienic environments. The sealing speed can be varied to suit the application, and the conveyor will handle weights up to 10kg, closing with a 15mm seal.

Horizontal Band Sealer & Printer - ME-881BS-30/665HS

Continuous Band Sealers - Vertical

More Continuous Band Sealers - Vertical ›
The ME-800BS range of continuous band sealers are inexpensive, yet built to a very high quality standard with a stainless steel outer casing, which makes it ideal for use in food preparation and hygienic environments. The sealing speed can be varied to suit the application, and the conveyor will handle weights up to 10kg, closing with a 15mm seal.

Vertical Band Sealer & Printer - ME-882BS/665HS
The ME-800BS range of continuous band sealers are inexpensive, yet built to a very high quality standard with a stainless steel outer casing, which makes it ideal for use in food preparation and hygienic environments. The sealing speed can be varied to suit the application, and the conveyor will handle weights up to 10kg, closing with a 15mm seal.

Vertical Band Sealer - ME-882BS-40L

Desktop Printers

More Desktop Printers ›
The Citizen CL-S 521 is aimed at the entry-level and desktop printer environment. The CL-S 521 is packed full of features and options usually only found on high-performance machines. Citizen have managed to use their skills in precision manufacturing to produce a high-performance printer that the bank manager will also like.

Citizen CL-S521
The Citizen CL-S 621 is designed with ease of use in mind. Citizen's industry leading clam shell mechanism makes media loading as simple as laying the media on the printer and closing the covers. Ribbon loading on the CL-S 621 takes seconds with a high-lift printhead giving easy access to load the ribbon. Ease of use contains with the CL-S 621's simple but powerful control panel systems and colour coded user adjustments for intuitive.

Citizen CL-S621
The CL-S 631 is ideal for producing small labels containing a large amount of complex data used inside mobile phones or on pharmaceutical packs. The higher resolution is also excellent for printing rating plates and other small labels on which graphics and logos are regularly used, such as CE logos or WEEE wheelie bin icons. The CL-S 631 fully supports 2D barcoding as well as the ability to print photo-quality images on media such as narrow wristbands.

Citizen CL-S631
With the ColorWorks C3500 (TM-C3500), you can easily customise and print your own colour labels. Whether it's printing packaging labels with colourful logos and pictures or tickets and ID cards with important barcodes and product information, this printer ensures you can print it all from one machine. It also helps you conform with GHS international chemical labelling guidelines, as labels can be printed on-demand without using pre-printed templates.

Epson ColorWorks C3500
The mini barcode printer which fits on every desk. The small footprint GoDEX RT200 & RT230 is the perfect printer solution where space is tight and value pricing is important.

GoDEX RT200 & RT230

Economy Tagging Guns

More Economy Tagging Guns ›
Our range of tagging guns is extensive & includes both the manual & battery operated versions. Each gun is design to accept only a certain type of needle for a particular application. For this reason the guns have been colour coded to make your life simpler when matching them to a type of needle.

Economy MkII Standards Tagging Gun - For use with regular & microspaced barbs (G803S)
Our range of tagging guns is extensive & includes both the manual & battery operated versions. Each gun is design to accept only a certain type of needle for a particular application. For this reason the guns have been colour coded to make your life simpler when matching them to a type of needle.

Economy Standards Tagging Gun - For use with regular spaced barbs (G903S)

Electrical Twist Tie Machines

More Electrical Twist Tie Machines ›
The 3567 is the successor to the popular and extremely reliable model 3559. It features all of the benefits of the predecessor, such as ease of portability, versatility, rugged construction and economy of use. It has benefited from specific improvements like an enhanced feed and twisting mechanism. The 3567 offers superior closures with either metallic or Polycore twist tie ribbons and uses just 84mm of ribbon per tie.

3567 Twist Tie Machine
The model 3570 is different from all other twisters on the market today; due to its adjustable capacity from 9 to 35mm and fully independent ribbon lenth adjustments. These independent settings allow for ribbon economy as well as special applications were short or long twist tie tails are desired.

3570 Twist Tie Machine

Electronic Pressure Sensitive Tape Dispensers

More Electronic Pressure Sensitive Tape Dispensers ›
The 6100 is a fast, simple, easy to use compact table-top Electronic Pressure-Sensitive Tape Dispenser that delivers automatic tape dispensing precision. Dispense ½" to 2" width pressure sensitive tapes on 3" cores automatically without an operator having to touch a button!

6100 Electronic Tape Dispenser

Epson Inkjet Labels

More Epson Inkjet Labels ›

Floor Mounted Constant Heat Sealers

More Floor Mounted Constant Heat Sealers ›
These special-foot operated CFN sealers are excellent for sealing polycello, humidity-proof cellophane, polyethylene films, aluminium foil-coated bags and gusset bags. The mesh seal is 15mm wide by 400mm long. This model is ideal for producing wide seals on thick bags. The machines are equipped with a timing light and audible signal to notify the user when it is time to release the pedal.

CFN Range

Floor Mounted Impulse Sealers

More Floor Mounted Impulse Sealers ›
The FD series is a new addition to our current range of sealers. It retains all of the original features of the extremely popular FI model, and also has the added benefit of twin elements providing double heat. This makes the machine ideal for heavy-duty applications.

FD Range
These FDC models were developed to make a strong (2.2mm) seal and cut off excess material with an additional round element in one easy operation. They are mechanically foot operated.

FDC Range
These FDC models were developed to make a strong (2.2mm) seal and cut off excess material with an additional round element in one easy operation. They are mechanically foot operated.

FDV Range
This Fi range of floor mounted impulse heat sealers is manually operated by a mechanically linked foot pedal, which enables the operator to work hands-free. These machines have been designed to function even in the harshest of working environments and are capable of sealing large, heavy bags.

FI Range

Floor Mounted Impulse Sealers with Cuttters

More Floor Mounted Impulse Sealers with Cuttters ›
These FDC models were developed to make a strong (2.2mm) seal and cut off excess material with an additional round element in one easy operation. They are mechanically foot operated.

FDC Range

Food Trays & Foils

More Food Trays & Foils ›

Genuine Toshiba TEC

More Genuine Toshiba TEC ›
102mm x 600m Outside Wound Genuine Toshiba Thermal Transfer Ribbon

102mm x 600m Outside Wound
102mm x 800m Outside Wound Genuine Toshiba Thermal Transfer Ribbon

102mm x 800m Outside Wound
110mm x 100m Outside Wound Genuine Toshiba Thermal Transfer Ribbon

110mm x 100m Outside Wound
110mm x 300m Outside Wound Thermal Transfer Ribbon

110mm x 300m Outside Wound
110mm x 300m Outside Wound Thermal Transfer Ribbon

110mm x 300m Outside Wound

Hand Held Sealers

More Hand Held Sealers ›
These dual heat, multipurpose, hand-held constant heat pliers are ideal for quickly, securely, and economically sealing PVC, OPS, PSP, and ESP blister and clamshell display boxes. The pliers remove the need for unsightly adhesive tape or dangerous staples. They form a visible 4mm x 10mm tamper-evident seal for added safety and peace of mind.

ME-105CH Heat Pliers
These crimpers are a hand-held solution for bag sealing, allowing the user to take the sealer to the product rather than the other way round. The HS version is ideal for use on poly bags up to 150mm wide, and will make a seal of 2mm. The DH model is designed particularly for use on thicker materials such as cellophane and wax paper, and will make a 15mm seal. Both models are lightweight, easy to use and come equipped with a temperature controller and an on/off light switch.

ME-150HS/DH
These specially designed hand held constant heat crimpers are ideal for welding multi-layer bags (polypropylene laminate paper and aluminum). Both models are lightweight, easy to use and are equipped with a temperature gauge. Available in either 300mm or 400mm widths with a 12mm seal.

ME-300DH & ME-400DH
The ME-405US Ultrasonic Clam Shell Sealer is safe and easy to operate. The material is welded by using ultrasonic waves, creating a strong 2.5mm x 3.5mm seal with no need to wait for pre-heating. It is ideal for sealing OPS, PSP, PVC and EPS food containers.

ME-405US Ultrasonic Clam Shell Sealer
Hand held constant heat roller is suitable for sealing plastic, polyethylene and cellophane. With a 57mm dia Teflon coated wheel, this versatile sealer can make a 1mm, 5mm or 9mm round, oval or square seal. Simple to use, the sealer comes with a convenient rack that keep the sealing wheel suspended above the work surface. The temperature is user adjustable and ranges from 30 - 220 degree C.

ME-801HW, ME-802HW & ME-803HW

Hand Operated Table Top Impulse Sealers

More Hand Operated Table Top Impulse Sealers ›
The C-Type series of Impulse Heat Sealers offer the packaging professional the next generation of heat sealer technology. Ergonomically designed and simple to operate, the C-Type series is perfect where fast, reliable heat sealing is required. Ideal for sealing PE, PP, PA and PVC foil and thinner double-coated materials.

C-Type Series
The Ci-Type series of Impulse Heat Sealers offer the packaging professional the next generation of heat sealer technology. Ergonomically designed and simple to operate, the Ci-Type series is perfect where fast, reliable heat sealing is required. Ideal for sealing PE, PP, PA and PVC foil and thinner double-coated materials. The stainless steel body makes this sealer ideal for the food industry.

Ci-Type Series
These industrial ranges of tabletop impulse sealers are ideal for a multitude of applications. Manufactured with a cast aluminium casing, they are designed to be robust enough for regular, industrial usage. All sealers in this range have a 1.75m power cord fitted with a standard UK plug. They operate at a temperature of 180°C regulated by an 8-setting timer. They make an excellent 2mm seal on numerous materials including PE, PVC, PP, PVA, Nylon, and all other heat-sealable products.

KF Series
The new extra long KF800H & KF1000H I-Bar sealers offers the flexibility of a portable tabletop sealer with a sealing length which is normally only available in floor mounted industrial units. The unit is supplied as standard with a 2mm sealing wire, with the option of a round wire for sealing and trimming. The sturdy steel construction makes this sealer robust and lightweight, and the carry handle allows for ease of movement between work stations.

KF Series Extra Long
KFC with Cutter Series

KFC with Cutter Series

Hand Wrappers

More Hand Wrappers ›
Hand wrapping machines are commonly used throughout the food industry to preserve the fresh taste and smell of the produce. They also aid the prevention of possible contamination within the working environment. The unit is manufactured from stainless steel, making it robust, easy to clean and durable.

450mm Stainless Steel Hand Wrapper

Heat sealers

More Heat sealers ›
The AI sealer is designed for sealing of thermoplastic films such as polyethylene and polypropylene. These models eliminate operator error in the sealing operation, as it is controlled by a plug-in transistorised circuit board, electronic timers and the uniform pressure provided by an electromagnet.

AI Range
Work Table & Film Holder

C / Ci / S Series Accessories
The C-Type series of Impulse Heat Sealers offer the packaging professional the next generation of heat sealer technology. Ergonomically designed and simple to operate, the C-Type series is perfect where fast, reliable heat sealing is required. Ideal for sealing PE, PP, PA and PVC foil and thinner double-coated materials.

C-Type Series
These special-foot operated CFN sealers are excellent for sealing polycello, humidity-proof cellophane, polyethylene films, aluminium foil-coated bags and gusset bags. The mesh seal is 15mm wide by 400mm long. This model is ideal for producing wide seals on thick bags. The machines are equipped with a timing light and audible signal to notify the user when it is time to release the pedal.

CFN Range
The Ci-Type series of Impulse Heat Sealers offer the packaging professional the next generation of heat sealer technology. Ergonomically designed and simple to operate, the Ci-Type series is perfect where fast, reliable heat sealing is required. Ideal for sealing PE, PP, PA and PVC foil and thinner double-coated materials. The stainless steel body makes this sealer ideal for the food industry.

Ci-Type Series

Industrial

More Industrial ›
The C7500 can help manufacturers produce consistent, high-quality labels in-house and on-demand. The printer features the new PrecisionCore printhead to ensure reliable, high-quality results. Our unique Nozzle Verification Technology (NVT) and dot substitution help prevent misprints and dead pixels for consistent printouts.

Epson ColorWorks C7500 (Ex-Demo)

Save £2,255.00
The C7500 can help manufacturers produce consistent, high-quality labels in-house and on-demand. The printer features the new PrecisionCore printhead to ensure reliable, high-quality results. Our unique Nozzle Verification Technology (NVT) and dot substitution help prevent misprints and dead pixels for consistent printouts.

Epson ColorWorks C7500 / C7500G
The rugged ColourWorks C831 inkjet printer with tractor feed for printing on continuous paper combines the best of dot matrix and inkjet technology. It combines all the benefits of a rugged colour inkjet printer with the accuracy of an 8-pin tractor feeder and is the first inkjet solution that has been BS5609 certified (complies with the latest GHS standards for chemical labelling).

Epson ColorWorks C831
The rugged ColorWorks M831 mono inkjet printer with tractor feed for continuous paper combines the best of dot matrix and inkjet technology.

Epson ColorWorks M831
Next generation in high output industrial barcode printers. With various interfaces as standard the GoDEX ZX series is ideal for integration into several environments. The compact and robust steel design will fulfill your most demanding applications.

GoDEX ZX1200i, ZX1300i & ZX1600i

Ink Cartridges

More Ink Cartridges ›
Epson ColorWorks C3400 Ink Cartridge (CMY)

Epson ColorWorks C3400 Ink Cartridge (CMY)
Epson ColorWorks C3500 Ink Cartridge (Black)

Epson ColorWorks C3500 Ink Cartridge (Black)
Epson ColorWorks C3500 Ink Cartridge (Black)

Epson ColorWorks C3500 Ink Cartridge (Black) - Pack of 5
Epson ColorWorks C3500 Ink Cartridge (Cyan)

Epson ColorWorks C3500 Ink Cartridge (Cyan)
Epson ColorWorks C3500 Ink Cartridge (Cyan)

Epson ColorWorks C3500 Ink Cartridge (Cyan) - Pack of 5

Label Applicators & Dispensers

More Label Applicators & Dispensers ›
The APN is a range of three different models dispensing oblong or square labels from 20mm to 100mm wide and up to 55mm long.

APN
The BL-200 label applicator will put a label onto virtually any round product. The BL-200 uses a three roller system, pinching the product accurately to ensure a smooth rotation and application or the label. Simply place a bottle, can or jar into the adjustable cradle and pull down on the handle to start the labelling cycle. Transparent and opaque labels can be used with this applicator.

BL200 Electric Bottle Label Applicator
The SH-402 dispenser is designed for labels up to 2 inches (51mm) wide. Suitable for vertical or horizontal use, it is facilitated by rubber-mounted feet on its bottom and side. It features an optical sensor that can detect shaped labels and most fabrics, including opaque and transparent varieties.

SH-402 Electric Label Dispenser
The SH-404 comprises a 6-inch (152mm) wide dispenser which automatically peels, releases and advances all types of butt-cut and die-cut labels. Its steel and aluminium casing makes it suitable for industrial environments. The dispenser has a high-speed motor that results in high productivity output.

SH-404 Electric Label Dispenser
The SH-414D comprises a 6-inch (152mm) wide dispenser which automatically peels, releases and advances all types of butt-cut and die-cut labels. Its steel and aluminium casing makes it suitable for industrial environments. The dispenser has a high-speed motor that results in high productivity output, along with other digital state of the art components including a dwell timer and label counter.

SH-414D Electric Label Dispenser with Label Counter

Label Printers

More Label Printers ›
The C7500 can help manufacturers produce consistent, high-quality labels in-house and on-demand. The printer features the new PrecisionCore printhead to ensure reliable, high-quality results. Our unique Nozzle Verification Technology (NVT) and dot substitution help prevent misprints and dead pixels for consistent printouts.

Epson ColorWorks C7500 / C7500G
“The SATO CL4NX is truly revolutionary” A 100% new, state-of-art development based on the philosophy of Simplicity, Performance and Robustness has produced a game-changing host of customer-beneficial features.

Sato CL4NX
Enhanced mid-range industrial barcode printer. All metal mechanism design featuring die-cast center plane and base making the GoDEX EZ2250i series perfect high volume applications.

GoDEX EZ2250i & EZ2350i
Toshiba TEC B-EX4T2

Toshiba TEC B-EX4T2
The Citizen CL-S 621 is designed with ease of use in mind. Citizen's industry leading clam shell mechanism makes media loading as simple as laying the media on the printer and closing the covers. Ribbon loading on the CL-S 621 takes seconds with a high-lift printhead giving easy access to load the ribbon. Ease of use contains with the CL-S 621's simple but powerful control panel systems and colour coded user adjustments for intuitive.

Citizen CL-S621

Label Rewind Units & Counters

More Label Rewind Units & Counters ›
The GoDEX T10 rewinder has an idler arm that can be positioned to rewind labels from either side of the printer. Depending on the user’s requirements, the T10 can rewind "inside or outside" label rolls.

GoDEX T10 Rewind
The GoDEX T20 rewinder has an idler arm that can be positioned to rewind labels from either side of the printer. Depending on the user’s requirements, the T20 can rewind "inside or outside" label rolls.

GoDEX T20 Rewind
Constant Adjustable Torque TM (“CAT”) technology has made the silent, easy-to-use Labelmate CAT-3 the “Industry Standard” Label Rewinder. There are no awkward dancer arms, troublesome belts or clutches. The standard Labelmate CAT-3 handles labels up to 155 mm (6-inches) wide and will wind a roll of labels up to a 330 mm (13”) diameter.

Labelmate LM-CAT-3-ACH Rewinder
The Labelmate LM-RRC-250 & LM-RRC-330 label counting systems are convenient to use and come ready with a pre-set counter. The Labelmate RRC-250 model is ideal for applications where the maximum roll size is 250mm (9.8”) or less and your label is 152 (6”) or less. The Labelmate RRC-330 is ideal for bigger rolls with max size of 330mm (13”).

Labelmate LM-RRC-250 & LM-RRC-330 Label Counters
The Labelmate LM-TWIN-CAT-2-ACH is a heavy duty rewinder which comes with a dual spindle and two powerful motors. This model offers maximum versatility in setting up the operation you require as the direction and torque on each can be controlled independently.

Labelmate LM-TWIN-CAT-2-ACH Twin Rewinder

Mk1 Premium Needles

More Mk1 Premium Needles ›
Our range of tagging guns is extensive & includes both the manual & battery operated versions. Each gun is design to accept only a certain type of needle for a particular application. For this reason the guns have been colour coded to make your life simpler when matching them to a type of needle. Examples of this would be our standard needles matching the gun with a blue trigger, long needles match a green trigger, fine needles match a brown trigger & long fine match a claret trigger.

Premium Standard Reinforced Tagging Needle (NSR)
Our range of tagging guns is extensive & includes both the manual & battery operated versions. Each gun is design to accept only a certain type of needle for a particular application. For this reason the guns have been colour coded to make your life simpler when matching them to a type of needle. Examples of this would be our standard needles matching the gun with a blue trigger, long needles match a green trigger, fine needles match a brown trigger & long fine match a claret trigger.

Premium Fine Reinforced Tagging Needle (NXR)
Our range of tagging guns is extensive & includes both the manual & battery operated versions. Each gun is design to accept only a certain type of needle for a particular application. For this reason the guns have been colour coded to make your life simpler when matching them to a type of needle. Examples of this would be our standard needles matching the gun with a blue trigger, long needles match a green trigger, fine needles match a brown trigger & long fine match a claret trigger.

Premium Fine Tagging Needle (NX)
Our range of tagging guns is extensive & includes both the manual & battery operated versions. Each gun is design to accept only a certain type of needle for a particular application. For this reason the guns have been colour coded to make your life simpler when matching them to a type of needle. Examples of this would be our standard needles matching the gun with a blue trigger, long needles match a green trigger, fine needles match a brown trigger & long fine match a claret trigger.

Premium Long Fine Tagging Needle (NXL)
Our range of tagging guns is extensive & includes both the manual & battery operated versions. Each gun is design to accept only a certain type of needle for a particular application. For this reason the guns have been colour coded to make your life simpler when matching them to a type of needle. Examples of this would be our standard needles matching the gun with a blue trigger, long needles match a green trigger, fine needles match a brown trigger & long fine match a claret trigger.

Premium Long Tagging Needle (NL)

Mk1 Regular Needles

More Mk1 Regular Needles ›
Our range of tagging guns is extensive & includes both the manual & battery operated versions. Each gun is design to accept only a certain type of needle for a particular application. For this reason the guns have been colour coded to make your life simpler when matching them to a type of needle. Examples of this would be our standard needles matching the gun with a blue trigger, long needles match a green trigger, fine needles match a brown trigger & long fine match a claret trigger.

Regular Fine Tagging Needle (RX/5)
Our range of tagging guns is extensive & includes both the manual & battery operated versions. Each gun is design to accept only a certain type of needle for a particular application. For this reason the guns have been colour coded to make your life simpler when matching them to a type of needle. Examples of this would be our standard needles matching the gun with a blue trigger, long needles match a green trigger, fine needles match a brown trigger & long fine match a claret trigger.

Regular Heavy Duty Tagging Needle (RHD/5)
Our range of tagging guns is extensive & includes both the manual & battery operated versions. Each gun is design to accept only a certain type of needle for a particular application. For this reason the guns have been colour coded to make your life simpler when matching them to a type of needle. Examples of this would be our standard needles matching the gun with a blue trigger, long needles match a green trigger, fine needles match a brown trigger & long fine match a claret trigger.

Regular Long Fine Tagging Needle (RXL/5)
Our range of tagging guns is extensive & includes both the manual & battery operated versions. Each gun is design to accept only a certain type of needle for a particular application. For this reason the guns have been colour coded to make your life simpler when matching them to a type of needle. Examples of this would be our standard needles matching the gun with a blue trigger, long needles match a green trigger, fine needles match a brown trigger & long fine match a claret trigger.

Regular Long Heavy Duty Tagging Needle (RLHD/5)
Our range of tagging guns is extensive & includes both the manual & battery operated versions. Each gun is design to accept only a certain type of needle for a particular application. For this reason the guns have been colour coded to make your life simpler when matching them to a type of needle. Examples of this would be our standard needles matching the gun with a blue trigger, long needles match a green trigger, fine needles match a brown trigger & long fine match a claret trigger.

Regular Long Tagging Needle (RL/5)

MK2 Needles

More MK2 Needles ›
Our range of tagging guns is extensive & includes both the manual & battery operated versions. Each gun is design to accept only a certain type of needle for a particular application. For this reason the guns have been colour coded to make your life simpler when matching them to a type of needle.

Fine Plastic Shank Tagging Needle (SPX/5)
Our range of tagging guns is extensive & includes both the manual & battery operated versions. Each gun is design to accept only a certain type of needle for a particular application. For this reason the guns have been colour coded to make your life simpler when matching them to a type of needle.

Standard Metal Shank Heavy Duty Tagging Needle (SMS/HD)
Our range of tagging guns is extensive & includes both the manual & battery operated versions. Each gun is design to accept only a certain type of needle for a particular application. For this reason the guns have been colour coded to make your life simpler when matching them to a type of needle.

Standard Metal Shank Tagging Needle (SMS/5)
Our range of tagging guns is extensive & includes both the manual & battery operated versions. Each gun is design to accept only a certain type of needle for a particular application. For this reason the guns have been colour coded to make your life simpler when matching them to a type of needle.

Standard Plastic Shank Tagging Needle (SPS/5)

Packaging Materials

More Packaging Materials ›
The Teneo range of vinyl and polypropylene tape is available in a choice of nine colours and six widths. They are suitable for use in many applications from carton and bag sealing to product fault marking.

Adhesive Tape
The Teneo range of vinyl and polypropylene tape is available in a choice of nine colours and six widths. They are suitable for use in many applications from carton and bag sealing to product fault marking.

Paper White Tape
The standard range of twist tie ribbons comes as a 4mm x 750m roll of plastic coated tie with one metal core. The ribbon can be used in conjunction with most twist-tie machines. The ties are reusable and there is no adhesive residue, so there is no risk of destroying the bag even with repeated opening and closing.

Single Wire Twist Tie Ribbon
The decorative range of twist tie ribbons come as a 4mm x 1000m roll of metallic foil coated tie with one metal core. Gold braided ribbons come as 4mm x 400m rolls. The ribbon can be used in conjunction with most twist-tie machines. The ties are reusable and there is no adhesive residue, so there is no risk of destroying the bag even with repeated opening and closing.

Decorative Single Wire Twist Tie Ribbon
The standard range of twist tie ribbons comes as a 6mm x 500m roll of plastic coated tie with two metal cores. The ribbon can be used in conjunction with most twist-tie machines.

Twin Wire Twist Tie Ribbon

Polythene Layflat Tubing

More Polythene Layflat Tubing ›
A Continuous tube of polyethylene on a roll. Layflat tubing is ideal for packaging long 'difficult to wrap' items. Insert into tubing and cut to required length then heat seal at one or both ends using one of our range of sealers to create made-to-measure bags.

Polythene Layflat Tubing

Premium Tagging Guns

More Premium Tagging Guns ›
Our range of tagging guns is extensive & includes both the manual & battery operated versions. Each gun is design to accept only a certain type of needle for a particular application. For this reason the guns have been colour coded to make your life simpler when matching them to a type of needle.

Fine Tach-it 2 Gun (G203X)
Our range of tagging guns is extensive & includes both the manual & battery operated versions. Each gun is design to accept only a certain type of needle for a particular application. For this reason the guns have been colour coded to make your life simpler when matching them to a type of needle.

Long Bano'k 303L Gun
Our range of tagging guns is extensive & includes both the manual & battery operated versions. Each gun is design to accept only a certain type of needle for a particular application. For this reason the guns have been colour coded to make your life simpler when matching them to a type of needle.

Long Fine Bano'k Gun (G503XL)
Our range of tagging guns is extensive & includes both the manual & battery operated versions. Each gun is design to accept only a certain type of needle for a particular application. For this reason the guns have been colour coded to make your life simpler when matching them to a type of needle. Examples of this would be our standard needles matching the gun with a blue trigger, long needles match a green trigger, fine needles match a brown trigger & long fine match a claret trigger.

Standard Tach-it 2 Gun (G203S)

Roll Labels

More Roll Labels ›
101mm x 148mm Thermal transfer labels

101mm x 148mm Thermal Transfer Label
102mm x 76mm Thermal Transfer Label

102mm x 76mm Thermal Transfer Label
25mm x 10mm Thermal Transfer semi gloss paper, permanent adhesive. Supplied outside wound on coils of 2,500 on 44mm ID cores.

25mm x 10mm Thermal Transfer Label
32mm x 20mm (2 Across) Thermal Transfer semi gloss paper, permanent adhesive. Supplied outside wound on coils of 10,000 on 44mm ID cores.

32mm x 20mm (2 Across) Thermal Transfer Label
38mm x 25mm (2 Across) Thermal Transfer semi gloss paper, permanent adhesive. Supplied outside wound on coils of 5,000 on 44mm ID cores.

38mm x 25mm (2 Across) Thermal Transfer Label

Semi Industrial

More Semi Industrial ›
Citizen CL-S700

Citizen CL-S700
Citizen CL-S703

Citizen CL-S703
Enhanced mid-range industrial barcode printer. All metal mechanism design featuring die-cast center plane and base making the GoDEX EZ2250i series perfect high volume applications.

GoDEX EZ2250i & EZ2350i
Zebra ZT200 Series Industrial Printers

Zebra ZT220 Series
Zebra ZT230 Series

Zebra ZT230 Series

Software

More Software ›
BarTender Basic Edition

BarTender Basic Edition
BarTender Professional

BarTender Professional
BarTender Automation

BarTender Automation
BarTender Enterprise Automation

BarTender Enterprise Automation
EnLabel is the professional choice for designing and printing labels through a functional Windows application which provides a graphics-based label design & separate print interface.

EnLabel

Special Offers

More Special Offers ›
80mm x 300m Outside Wound Thermal Transfer Ribbons

80mm x 300m Outside Wound

Save £1.54
The decorative range of twist tie ribbons come as a 4mm x 1000m roll of metallic foil coated tie with one metal core. Gold braided ribbons come as 4mm x 400m rolls. The ribbon can be used in conjunction with most twist-tie machines. The ties are reusable and there is no adhesive residue, so there is no risk of destroying the bag even with repeated opening and closing.

Decorative Twist Tie Ribbon Clearance
The C7500 can help manufacturers produce consistent, high-quality labels in-house and on-demand. The printer features the new PrecisionCore printhead to ensure reliable, high-quality results. Our unique Nozzle Verification Technology (NVT) and dot substitution help prevent misprints and dead pixels for consistent printouts.

Epson ColorWorks C7500 (Ex-Demo)

Save £2,255.00
The Friulmed FC260H vacuum chamber machine is well know for its excellent quality & the advanced technology solutions. It is made entirely out of stainless steel, both the internal structure & vacuum chamber & the bodywork. One of the main considerations in design of the FC260H was hygiene, hence the presence of internal, rounded corners & a sealing bar which is easy to remove. Both of these features facilitate the cleaning of the machine & therefore ensure a hygienic, safe machine.

Vacuum Chamber Sealer

Save £414.00

Stock Labels / Wristbands

More Stock Labels / Wristbands ›
101mm x 148mm Thermal transfer labels

101mm x 148mm Thermal Transfer Label
102mm x 76mm Thermal Transfer Label

102mm x 76mm Thermal Transfer Label
105mm x 148.5mm A4 Laser Sheet Label

105mm x 148.5mm A4 Laser Sheet Label
105mm x 35mm A4 Laser Sheet Label

105mm x 35mm A4 Laser Sheet Label
105mm x 37mm A4 Laser Sheet Label

105mm x 37mm A4 Laser Sheet Label

Table Top L-Bar Sealers

More Table Top L-Bar Sealers ›
The L-Bar Sealer is an economical portable unit. This one-step, fast-acting wrapping system for PE, PP and PVC materials makes two seals at once and features an energy saving timer. When used in conjunction with a hot air gun or heat tunnel this can be used as part of a shrink wrap system. The unit is supplied complete with a film dispenser rack. The ME-300LP unit is 495mm x 420mm x 158mm & the ME-400LP unit is 550mm x 620mm x 200mm.

ME-300LP L-Bar Sealer
The ME-4000LP L-Bar Sealer is an economical portable unit. This one-step, fast-acting wrapping system for PE, PP and PVC materials makes two seals at once and features an energy saving timer. When used in conjunction with a hot air gun or heat tunnel this can be used as part of a shrink wrap system. The unit is supplied complete with a film dispenser rack. The ME-300LP unit is 495mm x 420mm x 158mm & the ME-400LP unit is 550mm x 620mm x 200mm.

ME-400LP L-Bar Sealer

Tagging Barbs, Security Loops and Hooks

More Tagging Barbs, Security Loops and Hooks ›
Our ranges of barbs have been developed to suit every application. With 15 different ranges, including Super Fine, over 70 variations in length from 3mm to 175mm and 8 colours they are suitable for use with the flimsiest of silk lingerie to the toughest of leathers.

Heavy Duty Tagging Barbs
Our ranges of barbs have been developed to suit every application. With 15 different ranges, including Super Fine, over 70 variations in length from 3mm to 175mm and 8 colours they are suitable for use with the flimsiest of silk lingerie to the toughest of leathers.

Heavy Duty Tagging Barbs Coloured
Polyurethane Tagging Barbs

Polyurethane Tagging Barbs
Our ranges of barbs have been developed to suit every application. With 15 different ranges, including Super Fine, over 70 variations in length from 3mm to 175mm and 8 colours they are suitable for use with the flimsiest of silk lingerie to the toughest of leathers. The products are made from high quality Nylon 66 & Polypropylene, ensuring the right degree of strength & snap.

Premium Heavy Duty Tagging Barbs
Regular Microspaced Tagging Barbs

Regular Microspaced Tagging Barbs

Tagging Guns

More Tagging Guns ›
Our range of tagging guns is extensive & includes both the manual & battery operated versions. Each gun is design to accept only a certain type of needle for a particular application. For this reason the guns have been colour coded to make your life simpler when matching them to a type of needle.

Economy MkII Standards Tagging Gun - For use with regular & microspaced barbs (G803S)
Our range of tagging guns is extensive & includes both the manual & battery operated versions. Each gun is design to accept only a certain type of needle for a particular application. For this reason the guns have been colour coded to make your life simpler when matching them to a type of needle.

Economy Standards Tagging Gun - For use with regular spaced barbs (G903S)
Our range of tagging guns is extensive & includes both the manual & battery operated versions. Each gun is design to accept only a certain type of needle for a particular application. For this reason the guns have been colour coded to make your life simpler when matching them to a type of needle.

Fine Tach-it 2 Gun (G203X)
Our range of tagging guns is extensive & includes both the manual & battery operated versions. Each gun is design to accept only a certain type of needle for a particular application. For this reason the guns have been colour coded to make your life simpler when matching them to a type of needle.

Long Bano'k 303L Gun
Our range of tagging guns is extensive & includes both the manual & battery operated versions. Each gun is design to accept only a certain type of needle for a particular application. For this reason the guns have been colour coded to make your life simpler when matching them to a type of needle.

Long Fine Bano'k Gun (G503XL)

Tagging Needles

More Tagging Needles ›
Our range of tagging guns is extensive & includes both the manual & battery operated versions. Each gun is design to accept only a certain type of needle for a particular application. For this reason the guns have been colour coded to make your life simpler when matching them to a type of needle.

Fine Plastic Shank Tagging Needle (SPX/5)
Our range of tagging guns is extensive & includes both the manual & battery operated versions. Each gun is design to accept only a certain type of needle for a particular application. For this reason the guns have been colour coded to make your life simpler when matching them to a type of needle. Examples of this would be our standard needles matching the gun with a blue trigger, long needles match a green trigger, fine needles match a brown trigger & long fine match a claret trigger.

Premium Standard Reinforced Tagging Needle (NSR)
Our range of tagging guns is extensive & includes both the manual & battery operated versions. Each gun is design to accept only a certain type of needle for a particular application. For this reason the guns have been colour coded to make your life simpler when matching them to a type of needle. Examples of this would be our standard needles matching the gun with a blue trigger, long needles match a green trigger, fine needles match a brown trigger & long fine match a claret trigger.

Premium Fine Reinforced Tagging Needle (NXR)
Our range of tagging guns is extensive & includes both the manual & battery operated versions. Each gun is design to accept only a certain type of needle for a particular application. For this reason the guns have been colour coded to make your life simpler when matching them to a type of needle. Examples of this would be our standard needles matching the gun with a blue trigger, long needles match a green trigger, fine needles match a brown trigger & long fine match a claret trigger.

Premium Fine Tagging Needle (NX)
Our range of tagging guns is extensive & includes both the manual & battery operated versions. Each gun is design to accept only a certain type of needle for a particular application. For this reason the guns have been colour coded to make your life simpler when matching them to a type of needle. Examples of this would be our standard needles matching the gun with a blue trigger, long needles match a green trigger, fine needles match a brown trigger & long fine match a claret trigger.

Premium Long Fine Tagging Needle (NXL)

Tagging Products

More Tagging Products ›
Our range of tagging guns is extensive & includes both the manual & battery operated versions. Each gun is design to accept only a certain type of needle for a particular application. For this reason the guns have been colour coded to make your life simpler when matching them to a type of needle.

Economy MkII Standards Tagging Gun - For use with regular & microspaced barbs (G803S)
Our range of tagging guns is extensive & includes both the manual & battery operated versions. Each gun is design to accept only a certain type of needle for a particular application. For this reason the guns have been colour coded to make your life simpler when matching them to a type of needle.

Economy Standards Tagging Gun - For use with regular spaced barbs (G903S)
Our range of tagging guns is extensive & includes both the manual & battery operated versions. Each gun is design to accept only a certain type of needle for a particular application. For this reason the guns have been colour coded to make your life simpler when matching them to a type of needle.

Fine Plastic Shank Tagging Needle (SPX/5)
Our range of tagging guns is extensive & includes both the manual & battery operated versions. Each gun is design to accept only a certain type of needle for a particular application. For this reason the guns have been colour coded to make your life simpler when matching them to a type of needle.

Fine Tach-it 2 Gun (G203X)
Our ranges of barbs have been developed to suit every application. With 15 different ranges, including Super Fine, over 70 variations in length from 3mm to 175mm and 8 colours they are suitable for use with the flimsiest of silk lingerie to the toughest of leathers.

Heavy Duty Tagging Barbs

Tape Dispensers

More Tape Dispensers ›
The 4163 is a heavy duty, double sided tape dispenser, with a weighted base for stability. The adjustable brake, corrugated cutting blade for the toughest of tapes, and positive gear driven rewind system for the liner makes this dispenser perfect for industrial, assembly, shop, and specialty packaging.

4163 Double Sided Tape Dispenser
The 6100 is a fast, simple, easy to use compact table-top Electronic Pressure-Sensitive Tape Dispenser that delivers automatic tape dispensing precision. Dispense ½" to 2" width pressure sensitive tapes on 3" cores automatically without an operator having to touch a button!

6100 Electronic Tape Dispenser
BP333 Manual Water Activated Tape Dispenser

BP333 Manual Water Activated Tape Dispenser
Based on the the rugged BP333 for use with Tegrabond® E-Z Pull Tab Tape. Reliable and user-friendly, it has fifteen manually set tape lengths and is ideal for use where there is no convenient electrical power supply or where greater portability is required. The BP333-EZ is built to last and engineered to provide many years of consistent, reliable performance. This dispenser is perfect for light to medium usage and can be used with either reinforced or non-reinforced water activated tapes.

BP333-EZ Manual Pull Tab Tape Dispenser
The user-friendly BP500 electronic water-activated tape dispenser from Xtegra® Tegrabond® is suitable for reinforced and non-reinforced water activated tape, either as ‘gummed side in’ or ‘gummed side out’. The rugged BP500 offers straightforward operation and one-touch, bench-mounted tape dispensing.

BP500 Electric Water Activated Tape Dispenser

Thermal Transfer Ribbons & Ink Cartridges

More Thermal Transfer Ribbons & Ink Cartridges ›
101mm x 610m Inside Wound Thermal transfer ribbons

101mm x 610m Inside Wound
102mm x 600m Outside Wound Thermal Transfer Ribbon

102mm x 600m Outside Wound
102mm x 600m Outside Wound Genuine Toshiba Thermal Transfer Ribbon

102mm x 600m Outside Wound
102mm x 800m Outside Wound Genuine Toshiba Thermal Transfer Ribbon

102mm x 800m Outside Wound
104mm x 155m Outside Wound Thermal Transfer Ribbon

104mm x 155m Outside Wound

Tray Thermosealing Machines

More Tray Thermosealing Machines ›
The Friulmed FT1 tray thermosealing machine with manual temperature regulation, ensuring a perfect seal even when the contact area contains grease, fat, etc. The FT1 uses a patented SLEDGE SYSTEM to enable the sealing of different tray sizes & the fixed work level guarantees sealing on each edge.

FT1 Tray Thermosealing
The Friulmed FT2 tray thermosealing machine with manual temperature regulation, ensuring a perfect seal even when the contact area contains grease, fat, etc. The FT2 uses interchangeable tray molds enabling the user to seal different tray sizes & the fixed work level guarantees sealing on each edge.

FT2 Tray Thermosealing

Twist Tie Ribbons

More Twist Tie Ribbons ›
The decorative range of twist tie ribbons come as a 4mm x 1000m roll of metallic foil coated tie with one metal core. Gold braided ribbons come as 4mm x 400m rolls. The ribbon can be used in conjunction with most twist-tie machines. The ties are reusable and there is no adhesive residue, so there is no risk of destroying the bag even with repeated opening and closing.

Decorative Single Wire Twist Tie Ribbon
Polycore Non-Metallic

Polycore Non-Metallic
The standard range of twist tie ribbons comes as a 4mm x 750m roll of plastic coated tie with one metal core. The ribbon can be used in conjunction with most twist-tie machines. The ties are reusable and there is no adhesive residue, so there is no risk of destroying the bag even with repeated opening and closing.

Single Wire Twist Tie Ribbon
The standard range of twist tie ribbons comes as a 6mm x 500m roll of plastic coated tie with two metal cores. The ribbon can be used in conjunction with most twist-tie machines.

Twin Wire Twist Tie Ribbon

Vacuum Bags

More Vacuum Bags ›
Vacuum Bags

Vacuum Bags

Vacuum sealer - External suction

More Vacuum sealer - External suction ›
The VG series of gas flush vacuum sealers offers all the benefits of the standard VA series, with the additional capability of being able seal products in a modified atmosphere (MAP). This is ideal for products that require additional protection against oxidation or crushing.

VA and VG Series of Vacuum and Gas Flush Sealers

Vacuum Sealers - Chamber Style

More Vacuum Sealers - Chamber Style ›
The Friulmed FC260H vacuum chamber machine is well know for its excellent quality & the advanced technology solutions. It is made entirely out of stainless steel, both the internal structure & vacuum chamber & the bodywork. One of the main considerations in design of the FC260H was hygiene, hence the presence of internal, rounded corners & a sealing bar which is easy to remove. Both of these features facilitate the cleaning of the machine & therefore ensure a hygienic, safe machine.

Vacuum Chamber Sealer

Save £414.00

Water Activated Tape

More Water Activated Tape ›
High quality Tegrabond® water-activated paper tape increases consignment integrity.

Water Activated Plain Tape
High quality Tegrabond® water-activated reinforced pre-printed paper tape increases consignment integrity. The "SENTRY SEAL" brand highlights the tamper-proof properties of the tape. The "CAUTION" IS THIS PACKAGE DAMAGED?' tape encourages the recipients to check damage upon receiving the goods. The "IMPORTANT CAUTION" print alerts the handler for the need to be careful while handling the parcel.

Water Activated Pre-Printed Reinforced Tape
High quality Tegrabond® water-activated reinforced paper tape increases consignment integrity.

Water Activated Reinforced Plain Tape

Wide Web Printers

More Wide Web Printers ›
The rugged ColourWorks C831 inkjet printer with tractor feed for printing on continuous paper combines the best of dot matrix and inkjet technology. It combines all the benefits of a rugged colour inkjet printer with the accuracy of an 8-pin tractor feeder and is the first inkjet solution that has been BS5609 certified (complies with the latest GHS standards for chemical labelling).

Epson ColorWorks C831
The rugged ColorWorks M831 mono inkjet printer with tractor feed for continuous paper combines the best of dot matrix and inkjet technology.

Epson ColorWorks M831
Heavy duty 6" industrial barcode printer. All metal mechanism design featuring die-cast center plane and base make the GoDEX EZ6000Plus series ideal for the most demanding applications, such as large & specialist printing.

GoDEX EZ6200Plus+E & EZ6300Plus+E
The Toshiba TEC B-852 thermal transfer/direct thermal printer, continues Toshiba's tradition of producing well-made printers that lead the market in both performance and price. The B-852 features 300 dpi (11.8 dots/mm) and print speeds of 4 inches per second (101.8mm/sec). It can also handle a wide range of media. The B-852 has two standard and two optional interfaces available: the RS-232C (standard), Centronics interface (standard), Expansion I/O interface (optional) and PCMCIA (optional).

Toshiba TEC B-852
The B-EX6, 6 inch industrial printer series has been designed with the performance and functionality to meet the demands of the wide-web printing marketplace, with features and options to offer the lowest cost of ownership; including an extended long-life print head; Toshiba’s unique ribbon save mode and an 800m ribbon, to improve efficiency and ultimately reduce costs over the life of the printer.

Toshiba TEC B-EX6T1 - Near Edge

Wristbands

More Wristbands ›
Soft Z-Band DT Wristband Cartridge Kit (for HC100 printers) / White / 19mm x 195mm (Neonatal size)

Soft Z-Band DT Wristband Cartridge Kit (for HC100 printers) / White / 19mm x 195mm (Neonatal size)
Z-Band Splash DT Wristband Cartridge Kit (for HC100 printers) / Purple / 25mm x 254mm

Z-Band Splash DT Wristband Cartridge Kit (for HC100 printers) / Purple / 25mm x 254mm
Z-Band Splash DT Wristband Cartridge Kit (for HC100 printers) / Orange / 25mm x 254mm

Z-Band Splash DT Wristband Cartridge Kit (for HC100 printers) / Orange / 25mm x 254mm
Z-Band Splash DT Wristband Cartridge Kit (for HC100 printers) / Pink / 25mm x 254mm

Z-Band Splash DT Wristband Cartridge Kit (for HC100 printers) / Pink / 25mm x 254mm
Z-Band Splash DT Wristband Cartridge Kit (for HC100 printers) / Green / 25mm x 254mm

Z-Band Splash DT Wristband Cartridge Kit (for HC100 printers) / Green / 25mm x 254mm